Post Tags
Post tags are generally a part of the boat or a construction technique.
- anchor
- beams
- cabins
- decks
- dyneema
- epoxy
- fiberglass
- fillets
- gaff
- graphite
- hardware
- hatches
- hulls
- keel
- laminating
- mast
- motor
- paint
- platforms
- plexiglass
- rigging
- rudders
- sails
- seats
- sewing
- stitch and glue
- tillers
- trailer
- trampolines
anchor
beams
- First Assembly, Beam Lashings
- Weigh In
- Adding UHMW Tape
- Padding Beam Sockets and Attaching Fore Hatches
- Platform Hold Downs
- Mis-Adventures in Beam Sockets
- Beam Cleats
- Replacing the Beam Cleats and Sockets
- Beams
cabins
- Installing Windows
- Painting the Tops
- Prime the Decks and Flip
- Decks and Cabins Complete
- Drilling Holes for Ports and Windows
- Jib Sheet Leads
- Side Platform Ledges
- Making the Cabin Nicer
- Adding the Cabin Tops
- Adding the Cabin Sides
- Adding the Bunks
decks
- Adding UHMW Tape
- Padding Beam Sockets and Attaching Fore Hatches
- Painting the Tops
- Prime the Decks and Flip
- Decks and Cabins Complete
- Luggage Racks
- Back to Work!! Glassing the Decks
- Fore Decks
- Rear Decks
- Preparing the Bulkheads
dyneema
- Running Rigging and Raising Sails
- Standing Rigging - Part 2
- First Assembly, Beam Lashings
- Attaching Rudders
- Padding Beam Sockets and Attaching Fore Hatches
- Drill Rudder Holes
- Figuring Out the Hardware
- Standing Rigging - Part 1
epoxy
- Epoxy on Hulls Complete
- Keel and Skeg Protection
- Sheerstringer Fillets
- Decks and Cabins Complete
- Epoxy Tips 'n' Hints
- Glassing the Platforms
- Coamings and Hatches for the Bow Lockers
- Epoxy Coating the Insides of the Hulls
- Rebuilding Platforms
fiberglass
- Back to Work!! Glassing the Decks
- Glassing the Rest of the Hull Sides
- Glassing the First Hull Side
- Glassing the Keel
- Glassing the Platforms
fillets
gaff
graphite
hardware
hatches
- Padding Beam Sockets and Attaching Fore Hatches
- Attach Main Hatch
- Attach the Fore Hatch
- Main Hatch - Coamings and Rails
- Coamings and Hatches for the Bow Lockers
- Inspection Hatches
- Going Soft on the Main Hatches
- Glassing Fore Hatches
hulls
- First Assembly, Beam Lashings
- Weigh In
- Painting the Hull Bottoms
- Epoxy on Hulls Complete
- Keel and Skeg Protection
- Sheerstringer Fillets
- Glassing the Rest of the Hull Sides
- Glassing the First Hull Side
- Glassing the Keel
- Flipping the Hulls
- Finishing the Hull Fillets
- Starting the Hull Fillets
- Diagonal Stiffeners
- Wiring the Second Hull Together
- Wiring the Bulkheads In
- Wiring the First Hull Together
- Preparing the Bulkheads
- Epoxy Coating the Insides of the Hulls
- Gluing Hull Sides and Sheerstringers
- Cutting Plywood for Hulls
- Prepping Parts
- Deciding to Rebuild the Hulls
keel
laminating
mast
- Maiden Voyage
- Running Rigging and Raising Sails
- Mast Raising with a Gin Pole
- Standing Rigging - Part 2
- Mast
- Gaff
motor
paint
- Painting the Tops
- Painting the Hull Bottoms
- Prime the Decks and Flip
- Orange Paint Touchup
- Coamings and Hatches for the Bow Lockers
- Finishing the Hull Fillets
- Trailer
platforms
- First Assembly, Beam Lashings
- Weigh In
- Fitting the Platforms
- Platform Hold Downs
- Side Platform Ledges
- Glassing the Platforms
- Rebuilding Platforms
plexiglass
rigging
- Running Rigging and Raising Sails
- Standing Rigging - Part 2
- Figuring Out the Hardware
- Jib Sheet Leads
- Standing Rigging - Part 1
rudders
sails
seats
sewing
stitch and glue
- Side Platform Ledges
- Adding the Cabin Sides
- Diagonal Stiffeners
- Wiring the Second Hull Together
- Wiring the Bulkheads In
- Wiring the First Hull Together
- Beams